MCD B 40 Series

Type: Square and Rectangular

Blade Type: 3V Single Skin 

Construction: Galvanized Iron / Aluminum / Stainless Steel

Blade Operation: A-Parallel, B-Opposed

 

BETEC CAD B-40 Series Motorized Volume control dampers are square and rectangular type with both parallel blade operation and opposed blade operation with single skin blade design. These heavy duty dampers are used under high pressure and velocity conditions to achieve efficient and rattle free operation.

 

The square and rectangular type MCD’s are designed for handling maximum air capacities at minimum pressure drop.

Data

Damper Performance Ratings

OperatingPressure – 6” wg (1500Pa.) Max.

Leakage – Class- II (Refer AMCA 500 D).

Velocity – 3000fpm (15m/s).

Standard Construction

Frame

6” x 1.18” x 18 gauge (150 x 30 x 1.2 mm) thick roll formed galvanized steel ‘C’ channel.

Blades

6” (150 mm) wide, 1.5 mm (16 gauge) thick galvanized steel 3V type roll formed.

Bushes

Bronze.

Mechanical Linkage

Galvanized steel linkages concealed in the frame.

Axles

12 mm square galvanized steel.

Jamb Seal

0.3mm thick stainless spring steel.

Actuator

Siemens(On/Off type 24V AC/230V AC)

Optional Fittings

Bushes

Brass.

Flange Holes

Available customers request, please specify.

Transitions

Neck adaptor for round duct connections.

Actuator

Honeywell/Belimo/Sauter(24V AC/230V AC)

 

Alphabet indicates the type of blade operation

A – Parallel Blade.
B – Opposed Blade.
– Gear Opposed Blade

Optional Construction

Frame : Thickness up to 3 mm
Frame Depth : Up to 200 mm
Blade : Thickness up to 3 mm
Blade Width : Up to 150 mm
Frame and Blade Material : Stainless Steel (304/316L)

Note:

Increments of 2” (50 mm) possible with combination of 4’’& 6’’ blade width.

Maximum single module size is 48”x40” (1200×1000 mm).

Damper, width W > 48” (1200 mm) or H > 40” (1000mm), is provided with a center mullion partition.

Downloads

Request for Quotation